DIAMETER MEASUREMENT

InteliSENS® BG Series Diameter Bench Gauge

InteliSENS® BG1030 Bench Gauge (with optional V-blocks)

Особенности

 

  • Non-contact, laser measurement does not deform or mark measured objects.
  • Available in 27 or 57mm maximum measurement models.
  • Provides statistical analysis of measurements.
  • Available fitted with optional rotary chuck or V-groove sample holders.
  • Extremely easy to use.
  • For off-line, stand-alone use in incoming inspection, quality control and laboratory applications.

Дополнительная инфо

Series Brochure
Download PDF >

Pre-sales enquiry click here >

Manual request click here >

Support request click here >

InteliSENS® BG Series Diameter Bench Gauge

Introduction

Derived from the highly successful InteliSENS® DG Series of scanning-laser diameter gauges, the InteliSENS® BG Series bench gauges are intended for off-line, stand-alone use in incoming inspection, quality control and laboratory applications.

A Proton Products InteliSENS® DG Series scanning-laser diameter gauge is integrated together with a miniature touch screen PC and a mains power supply unit on an aluminium baseboard. Depending on the application, optional ground steel V-grooves or a rotary chuck may also be integrated for precise sample holding.

InteliSENS® BG Series bench gauges are a fast, easy-to-use and non-contact alternative to vernier callipers and micrometer screw gauges. The touch screen PC provides measurement display with automatic maximum/minimum and ovality calculation, statistical analysis and data logging. Logged data may be extracted from the touch screen PC using a USB flash memory stick.

Operating Principle

Proton Products InteliSENS® DG Series diameter gauges rapidly scan a laser beam across the object under measurement. The laser beam is focused by a receiving lens onto a photodiode and the electrical signal digitally processed by a Proton-designed FPGA processor. The time duration for which the object obscures the laser beam is directly proportional to the object diameter.

DG-Operating-Principle

Specifications

Model
BG1030
BG1060
Units
Gate size3060mm
1.182.36inch
Minimum diameter0.10.2mm
0.0040.004inch
Maximum diameter2757mm
1.0632.244inch
Resolution11µm
Accuracy±(1µm + 0.008% of object diameter)±(1.5µm + 0.008% of object diameter)-
Specification
Minimum
Typical
Maximum
Units
Measurement rate600scan/s
Operating temperature545°C
41113°F
Relative humidity (at 38°C / 105°F)90%
Power supply voltage85220264VAC (rms)
Power supply frequency4765Hz
Power consumption24W
Measurement units (end-user configurable)mminch
Statistical analysisLargestSmallestMeanCpCpk
Helix modeEnvelope diameter of braided or stranded cables
Glass logicDiameter measurement for transparent objects